From: Huy Luu (Huy_Luu%COMMONWEALTH@xxxxxxxxxx)
Date: Sat Jan 12 2002 - 13:13:56 GMT-3
The aux port is use for dialin for management access, it is not connected
to any router. The port just seems to hang with an open connection.
-----David L Stewart <D.Stewart@mail.UTexas.edu> wrote: -----
To: "Huy Luu" <Huy_Luu%COMMONWEALTH@ccginc.com>, ccielab@groupstudy.com
From: David L Stewart <D.Stewart@mail.UTexas.edu>
Date: 01/11/2002 07:03PM
Subject: Re:
One end needs the "no exec" command to
keep the two routersfrom chatting.At 04:59 PM 1/11/2002, Huy Luu wrote:>Hi
all,>>I have a aux port on a 7200 set up for dial in in case of an
emergency. I>tried to reverse telnet several times with port 2001 and it
worked. But at>the third try I got an error stating that the remote host
refuse the>connection. I tried clearing the line and the aux port but when
I issue>the command "show line " , the aux line shows a * next to the line,
which I>believe that indicates that the line is in use. I've tried to
clear the>line and clear aux 0 command but this * symbol is still in the
"show line">dispaly. How can I make the aux port drop the
from the CCIELAB list, send a message to>majordomo@groupstudy.com with the
body containing:>unsubscribe ccielab
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:26 GMT-3