From: Eddie Arcuri (earcuri@xxxxxxxxx)
Date: Fri Jan 11 2002 - 01:45:49 GMT-3
Wow, that saves a LOT of time. Wish I had known that earlier.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Michael Popovich
Sent: Thursday, January 10, 2002 9:32 PM
To: Bryan Ginman; Steven; ccielab
Subject: Re: Great trick
keep in mind you can use the "send *" command on the access server.
that will allow you to send configuration commands to any selected number of
tty lines or all of them at once. The "*" parameter sends the message to
all.
Example:
access-server#send *
Message to be sent to tty lines...(blah blah)
enable
configure t
alias exec wrbgn show run | begin
alias exec b show ip bgp
alias exec o show ip ospf
alias exec i show ip route
alias exec ci clear ip route *
alias exec cb clear ip bgp *
alias exec bn show ip bgp neigh
alias exec bd show ip bgp data
exit
write mem
CTRL^Z
confirm message to be sent <yes>
That will configure all IOS devices for those commands at the same time.
5000 switch and token ring switch would just ignore those commands.
HTH
MP
----- Original Message -----
From: "Bryan Ginman" <ginmanb@westnet.com>
To: "Steven" <adream@163.com>; "ccielab" <ccielab@groupstudy.com>
Sent: Thursday, January 10, 2002 8:49 PM
Subject: RE: Great trick
> Yes I do. You can use notepad write it once and paste it for life.
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Steven
> Sent: Thursday, January 10, 2002 9:20 PM
> To: ccielab
> Subject: Re: Great trick
>
>
> do you think using alias can save a lot of time during exam?
> you have to input all the alias and copy them to all the routers .
>
>
> ----- Original Message -----
> From: "Bryan Ginman" <ginmanb@westnet.com>
> To: "CCIE" <ccielab@groupstudy.com>
> Sent: Friday, January 11, 2002 9:13 AM
> Subject: Great trick
>
>
> > This is a great trick I learned from someone on this list awhile ago. I
by
> > no means take credit for it.
> >
> > alias exec s1 sho run | begin
> > alias exec s2 sho run | include
> >
> > This parses the config quickly to give for s1 say "s1 router bgp" it
will
> > sho the config from router bgp AS#
> >
> > "s2 dlsw" for example will show you all lines in the config that have
dlsw
> > in it. Thought it was neat and wanted to pass it along.
> >
> > Cheers,
> >
> > Bryan
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:24 GMT-3