From: Bobby Mann (Bobby.Mann@xxxxxxxxxxxxxxx)
Date: Thu Jan 10 2002 - 23:54:39 GMT-3
btw....it's better to save configs on 2500 more often and use the command
"show start | beg" rather then show run | beg".... It's much faster to view
the config with show start... (There is no wasting time if you "write mem"
on one router and start working on another).
bob,
-----Original Message-----
From: Albert Lu [mailto:albert_ccie@yahoo.com]
Sent: Thursday, January 10, 2002 6:22 PM
To: 'Bryan Ginman'
Cc: 'CCIE'
Subject: RE: Great trick
Be aware that it only works with 12.1 and some 12.0T IOS.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Bryan Ginman
Sent: Friday, January 11, 2002 12:14 PM
To: CCIE
Subject: Great trick
This is a great trick I learned from someone on this list awhile ago. I by
no means take credit for it.
alias exec s1 sho run | begin
alias exec s2 sho run | include
This parses the config quickly to give for s1 say "s1 router bgp" it will
sho the config from router bgp AS#
"s2 dlsw" for example will show you all lines in the config that have dlsw
in it. Thought it was neat and wanted to pass it along.
Cheers,
Bryan
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:23 GMT-3