From: Steven (adream@xxxxxxx)
Date: Fri Jan 11 2002 - 00:23:35 GMT-3
good ,but if you make some changes in running config ,you should not forget to
"wr",
to keep them the same .
----- Original Message -----
From: "Bobby Mann" <Bobby.Mann@RoundHeaven.com>
To: "'Albert Lu'" <albert_ccie@yahoo.com>; "'Bryan Ginman'" <ginmanb@westnet.co
m>
Cc: "'CCIE'" <ccielab@groupstudy.com>
Sent: Friday, January 11, 2002 10:54 AM
Subject: RE: Great trick
> btw....it's better to save configs on 2500 more often and use the command
> "show start | beg" rather then show run | beg".... It's much faster to view
> the config with show start... (There is no wasting time if you "write mem"
> on one router and start working on another).
>
> bob,
>
> -----Original Message-----
> From: Albert Lu [mailto:albert_ccie@yahoo.com]
> Sent: Thursday, January 10, 2002 6:22 PM
> To: 'Bryan Ginman'
> Cc: 'CCIE'
> Subject: RE: Great trick
>
>
> Be aware that it only works with 12.1 and some 12.0T IOS.
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Bryan Ginman
> Sent: Friday, January 11, 2002 12:14 PM
> To: CCIE
> Subject: Great trick
>
>
> This is a great trick I learned from someone on this list awhile ago. I by
> no means take credit for it.
>
> alias exec s1 sho run | begin
> alias exec s2 sho run | include
>
> This parses the config quickly to give for s1 say "s1 router bgp" it will
> sho the config from router bgp AS#
>
> "s2 dlsw" for example will show you all lines in the config that have dlsw
> in it. Thought it was neat and wanted to pass it along.
>
> Cheers,
>
> Bryan
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:23 GMT-3