From: vadim shayevich (vshayevich@xxxxxxxxxxx)
Date: Thu Jan 10 2002 - 17:26:43 GMT-3
On page 853 transparent bridging over frame-relay scenario:
[r enterprise]<s0.2 point-to-point> -- (dlci102 - dlci121 ) -- <s0>[r
shuttle_5]
[r enterprise]<s0.1 multipoint > -- (dlci130 - dlci131 ) -- <s0>[r
shuttle_6]
If you look in the final configuration there is no [frame-relay map bridge
<dlci> broadcast] statement
specified on either side of point-to-point connection.
enterprise#
bridge 1 protocol ieee
int serial0.2 point-to-point
ip address 172.16.2.1 255.255.255.0
no ip directed-broadcast
frame-relay interface-dlci 102
bridge-group 1
shuttle_5#
bridge 1 protocol ieee
int serial0
ip address 172.16.2.5 255.255.255.0
encapsulation frame-relay
frame-relay interface-dlci 121
frame-relay lmi-type cisco
bridge-group 1
Will STP work?
ABNAMRO NA
vadim.shayevich@abnamro.com
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:23 GMT-3