From: Chua, Parry (Parry.Chua@xxxxxxxxxx)
Date: Wed Jan 09 2002 - 22:09:08 GMT-3
Hi,
There is a couple of config problem in the orginal posting.
1. If you redistribute ospf1 to ospf2, the ospf 2 also must run with
area 0.
2. If the redistribute network to RIP is on different classful address,
a resultant classful network will be in RIP network.
May be I miss out something.
Regards
Parry
-----Original Message-----
From: Leonardo Pereira [mailto:lpereira@br.ibm.com]
Sent: Thursday, January 10, 2002 2:06 AM
To: ccielab@groupstudy.com
Subject: Re: Redistribute ospf1-> ospf2->rip
Hi Everybody !!!
I was just listening until now, but now I resolved to give my 2 cents
(like
you guys say... :-D ).
My lab is scheduled to February 19th and I was studying this yesterday.
It
seems to me that you are doing the summarization in a wrong way. You
didnot
send the ip address configured in your R2's Ethernet 0, but I am
supposing
that it is configured with a 24 bit mask because the other Ethernet 0 at
R1. So, when you try to redistribute from ospf to rip you should
summarize
with a 24 bit mask and not 16 bit mask as you are doing.
You can see a great explanation about this at:
http://www.cisco.com/warp/public/105/54.html
So the summary-address, IMHO, should be:
summary-address 172.16.1.0 255.255.255.0
Try this and let us know if it works.
Regards,
Leonardo.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:22 GMT-3