From: Markus Haas (mh@xxxxxxxxxxxxx)
Date: Wed Jan 09 2002 - 13:37:06 GMT-3
Hi Jimmy,
thanks for your help.
The Cat is now reachable within my workgroup.
Markus
-----Ursprungliche Nachricht-----
Von: Jimmy Dotson [mailto:jimmy@chattanooga.net]
Gesendet: Mittwoch, 9. Januar 2002 15:11
An: Markus Haas
Cc: Ccielab
Betreff: Re: CAT2900XL
Try a "no ip address" and "shut" under int VLAN 1.
Then, create "int VLAN2" (or whichever), and "ip add x.x.x.x", and "no
shut".
It has been my experience with these that they'll only support one "up"
VLAN int with an ip address on it (well... and work that is... they can
all have ip's... just make sure the one you need is the only one that's
"no shut").
my $0.02
Jimmy Dotson
CCIE #7932
Markus Haas wrote:
>
> Hi,
>
> the Management-VLAN is default in VLAN1. Is it possible tho change this
> behavior ?
> I have no idea's how I must configure it.
> The Cat is running with IOS.
>
> Config:
>
> [SNIP]
>
> interface VLAN1
> ip address 123.1.0.2 255.255.255.0
> no ip directed-broadcast
> no ip route-cache
> !
> ip default-gateway 123.1.0.1
>
> [SNIP]
>
> Thanks,
> Markus
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:21 GMT-3