From: fwells12 (fwells12@xxxxxxxxxxx)
Date: Tue Jan 08 2002 - 18:38:40 GMT-3
Play around with this command on Z's subinterfaces...
no ipx split-horizon eigrp <AS#>
----- Original Message -----
From: "George Hansen" <HansenG@radiological.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, January 08, 2002 1:02 PM
Subject: Troubleshooting IPX EIGRP
> A have a router (Z) with two Frame Relay sub-interfaces connecting to
Router A and B. Router Z will not form an IPX EIGRP neighbor relationship
with Router B, but it will with Router A. Any suggestions on how to
debug/fix this?
>
> Router Z:
> interface Serial0.1 point-to-point
> ip address 10.31.26.6 255.255.255.252
> ipx network A4
> frame-relay interface-dlci 101
> interface Serial0.2 point-to-point
> ip address 10.63.26.6 255.255.255.252
> ipx network B4
> frame-relay interface-dlci 102
>
> IP EIGRP neighbor relationship with A and B.
> IPX EIGRP neighbor relationship with A, not B.
> Can ping A4.0001.0001.0001, and A4.FFFF.FFFF.FFFF
> Can ping B4.0001.0001.0001, NOT B4.FFFF.FFFF.FFFF
>
> RouterA:
> interface Serial0.1 point-to-point
> ip address 10.31.26.5 255.255.255.252
> ipx network A4
> frame-relay interface-dlci 101
>
> IP EIGRP neighbor relationship with Z.
> IPX EIGRP neighbor relationship with Z.
> Can ping A4.0002.0002.0002, and A4.FFFF.FFFF.FFFF
>
> Router B:
> interface Serial0.1 point-to-point
> ip address 10.63.26.6 255.255.255.252
> ipx network B4
> frame-relay interface-dlci 102
>
> IP EIGRP neighbor relationship with Z.
> NO IPX EIGRP neighbor relationship with Z.
> Can ping B4.0002.0002.0002, NOT B4.FFFF.FFFF.FFFF
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:20 GMT-3