From: Annu (annu_roopa@xxxxxxxxx)
Date: Mon Jan 07 2002 - 19:52:44 GMT-3
Elias,
A couple of things which u may have to check ?
1.VLSM to FLSM redistribution.
2.I think under ur RIP config only classful network
would be entered.
3. I think ur distribute-list 100 should be "out" as
its already redistributed,now u have to control what
to send out to RIP.
Let us know.HTH.
Annu
> ----- Original Message -----
> From: "Elias Udechime" <euchime@yahoo.com>
> To: <ccielab@groupstudy.com>
> Sent: Monday, January 07, 2002 4:25 PM
> Subject: Simple OSPF Redistribution to RIP
>
>
> > Hi all,
> >
> > I ran into this problem trying to redistribute
> OSPF
> > into RIPv1
> >
> > Topology:
> > | | Vlans
> > | Rip OSPF
> > |172.16.1.0-15
> > 172.168.x.x
> LAN|----------Router1---------|172.16.1
> > -31
> > |
> |172.16.1.-63
> > Also
> 10.1.1.1
> >
> >
> > There are many VLANs. I only want two VLANs to be
> > redistributed into RIP.
> >
> > I have tried access-list, distribute-list and
> > redistributed into Rip, this does not work. Could
> some
> > shade more light--light.
> >
> > Sample config:
> >
> > Router ospf 10
> > network 172.16.1.0 0.0.0.255 area 0
> > network 10.0.0.0 0.0.255.255 area 0
> >
> > Router Rip
> > Network 172.168.1.0
> > Redistribute OSPF 10 metric 2
> > distribute-list 100 in
> >
> > Access-list 100 permit IP 172.16.1.27 0.0.0.15 any
> > Access-list 100 permit IP 172.16.1.17 0.0.0.15 any
> >
> > These are only two IP in two different VLANs I
> want to
> > redistribute into RIP environment.
> >
> >
> > Elias
> >
> >
> >
> >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:19 GMT-3