From: Elias Udechime (euchime@xxxxxxxxx)
Date: Tue Jan 08 2002 - 11:00:43 GMT-3
Diagram was messed up. Rip is running only
172.168.x.X. look at it again.
The netmask is /28
I hope this helps. I have done distribute-list out, it
did not work either. I do understand the problem with
classless and classful. I guess the next trial would
be Route Map.
Thanks for your chipping in your suggestions.
>
> Topology:
> | | Vlans
> | Rip OSPF
> |
|172.16.1.0-15
> 172.168.x.x LAN|----------Router1------|172.16.1 -31
> |172.16.1.-63
> Also 10.1.1.1
>
>
> There are many VLANs. I only want two VLANs to be
> redistributed into RIP.
>
> I have tried access-list, distribute-list and
> redistributed into Rip, this does not work. Could
> some
> shade more light--light.
>
> Sample config:
>
> Router ospf 10
> network 172.16.1.0 0.0.0.255 area 0
> network 10.0.0.0 0.0.255.255 area 0
>
> Router Rip
> Network 172.168.1.0
> Redistribute OSPF 10 metric 2
> distribute-list 100 in
>
> Access-list 100 permit IP 172.16.1.27 0.0.0.15 any
> Access-list 100 permit IP 172.16.1.17 0.0.0.15 any
>
> These are only two IP in two different VLANs I want
> to
> redistribute into RIP environment.
>
>
> Elias
>
>
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:20 GMT-3