From: Elliott Reyes (reyesel@xxxxxxxxxxxxxxxxxx)
Date: Mon Jan 07 2002 - 15:37:47 GMT-3
I believe with 5.5(11) and higher once you utilize the AAA Server the switch
will automatically go into enable mode.
Elliott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Raphael Gallegos
Sent: Monday, January 07, 2002 7:14 AM
To: tsungdapaulyoung@yahoo.com; ccielab@groupstudy.com
Subject: Re: Catalyst 5000 auto login
Paul,
Are you sure that you are not asking about the "set ip permit" feature with
cats. Although, I found something stating a caveat with cat5000, that meant
that if you could get to user level you could get to privilege level by just
pressing enter. But that was with old IOS somethn like, 542 and earlier.
I know what you are asking is definitely available with 4000 and 6500
series. I will try to find out more on this.
If anyone knows anything about this feature, please let us know. Thanks.
Raphael
>From: Paul Young <tsungdapaulyoung@yahoo.com>
>Reply-To: Paul Young <tsungdapaulyoung@yahoo.com>
>To: ccielab@groupstudy.com
>Subject: Catalyst 5000 auto login
>Date: Sat, 5 Jan 2002 13:34:01 -0800 (PST)
>
>Hi Group:
>
> Does anyone know the commands to configure Cat5000
>so that you go directly to enable mode when telneting
>in from another device?
>
>Sort of like the comparable router command below:
>
> line vty 0 4
> privilege level 15
>
>Thanks.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:19 GMT-3