From: omar guarisco (oguarisco44@xxxxxxxxxxx)
Date: Mon Jan 07 2002 - 21:37:17 GMT-3
Are you sure ???
This only on a C5K because we have C4K installed using CatOS 5.5 and 6.0 and
its not possible to directly go into enable mode...
I thought that using CatOS this feature is not available on all Cat family
Omar
>From: "Elliott Reyes" <reyesel@corp.earthlink.net>
>Reply-To: "Elliott Reyes" <reyesel@corp.earthlink.net>
>To: "'Raphael Gallegos'" <raphaeljg@hotmail.com>,
><tsungdapaulyoung@yahoo.com>, <ccielab@groupstudy.com>
>Subject: RE: Catalyst 5000 auto login
>Date: Mon, 7 Jan 2002 10:37:47 -0800
>
>I believe with 5.5(11) and higher once you utilize the AAA Server the
>switch
>will automatically go into enable mode.
>
>
>
>Elliott
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>Raphael Gallegos
>Sent: Monday, January 07, 2002 7:14 AM
>To: tsungdapaulyoung@yahoo.com; ccielab@groupstudy.com
>Subject: Re: Catalyst 5000 auto login
>
>
>Paul,
>Are you sure that you are not asking about the "set ip permit" feature with
>cats. Although, I found something stating a caveat with cat5000, that meant
>that if you could get to user level you could get to privilege level by
>just
>pressing enter. But that was with old IOS somethn like, 542 and earlier.
>
>I know what you are asking is definitely available with 4000 and 6500
>series. I will try to find out more on this.
>
>If anyone knows anything about this feature, please let us know. Thanks.
>
>Raphael
>
>
> >From: Paul Young <tsungdapaulyoung@yahoo.com>
> >Reply-To: Paul Young <tsungdapaulyoung@yahoo.com>
> >To: ccielab@groupstudy.com
> >Subject: Catalyst 5000 auto login
> >Date: Sat, 5 Jan 2002 13:34:01 -0800 (PST)
> >
> >Hi Group:
> >
> > Does anyone know the commands to configure Cat5000
> >so that you go directly to enable mode when telneting
> >in from another device?
> >
> >Sort of like the comparable router command below:
> >
> > line vty 0 4
> > privilege level 15
> >
> >Thanks.
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:19 GMT-3