From: McCallum, Robert (Robert.McCallum@xxxxxxxxxxxxxxxxxx)
Date: Mon Jan 07 2002 - 06:34:11 GMT-3
VZ look up the archives, specifically round the time of Oct last year. I had a
similar problem and managed to get it working and posted the solution as to wh
at exactly you need to do.
-----Original Message-----
From: VZ [mailto:vincentzhang@yahoo.com]
Sent: 07 January 2002 08:07
To: tom cheung; bhill@sgdata.com
Cc: ccielab@groupstudy.com
Subject: Re: DLSw peer doesn't established with pass-through configured!
I will try these options and reply when back.
Thanks,
VZ
tom cheung wrote:
> Maybe you can try the following and see if you've better luck. For
> passthru, you need fram map dlsw instead of llc2.
>
> dlsw remote-peer 0 frame-relay interface serialX DLCI# pass-thru
> !
> interface serialX
> encapsulation frame-relay
> frame-relay map dlsw DLCI# broadcast
>
>
>
>> From: VZ <vincentzhang@yahoo.com>
>> Reply-To: VZ <vincentzhang@yahoo.com>
>> To: ccielab@groupstudy.com
>> Subject: DLSw peer doesn't established with pass-through configured!
>> Date: Mon, 07 Jan 2002 09:59:28 +0800
>>
>> Hi all,
>>
>> When configuring the dlsw over frame relay session, everything is
>> perfect until the option " pass-thru" be added on statement of "dlsw
>> remote-peer xxxx".
>>
>> I cannot find the answer even if searched the CCO site.
>>
>> Thanks,
>>
>> VZ
>>
>>
>>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:18 GMT-3