From: Ravi (s_ravichandran@xxxxxxxxxxx)
Date: Sat Jan 05 2002 - 03:51:49 GMT-3
Hi,
Need Help to set up my ATM switch.
I bought a Olicom CrossFire 9100 ATM switch with 4 utp and 4 ST oc3 ports for
my lab practice. Unfortunately the switch did not come with any user manual.
The seller told me that the manual is available on Olicom.com for download, I
tried that without any success.
Anyone in this group could help me to set up the switch for my lab practice. I
have never worked on these switches so the menu is new to me but looks user
friedly.
Regards,
Ravi
Just to give an idea, this is what I have,
CF-9100>system ?
system set | show | reboot | hboot | mboot | delete:
set system set {option}
show system show {option}
reboot reboot - equivalent to hitting reset switch.
hboot system default reboot
mboot system default reboot with bootp
delete system delete {option}
CF-9100>system set ?
system set time | name | location | contact | access | password | ip |
tftp/boot
p | image | laa:
time system set time {action}
name system set name {string}
location system set location {location}
contact system set contact {contact}
access system set access {option}
password change the password for write-access
ip set the system IP parameters
tftp/bootp system set tftp/bootp {host_ip | filename | start}
image system set image {current | test} image_#
laa system set laa {MAC address}
CF-9100>system set password ?
<2 (Access Denied)>
CF-9100>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:16 GMT-3