From: Wen Jia Yang (tonyblair@xxxxxxxxx)
Date: Fri Jan 04 2002 - 13:00:00 GMT-3
thanks for your help.I tried,and it worked.
----- Original Message -----
From: "Scott Morris" <swm@emanon.com>
To: "'Wen Jia Yang'" <tonyblair@etang.com>; <ccielab@groupstudy.com>
Sent: Friday, January 04, 2002 11:01 PM
Subject: RE: how to control the baudrate settings?
> Don't forget that once you change your settings on the console port (like
> you did below), then you also need to change the settings in your
> Hyperterminal!!! They have to match.
>
> In Hyperterminal, once you change the connection properties, disconnect,
> then reconnect. In some versions, you will need to completely exit
> Hyperterminal and come back in to have the new baud rate take effect.
>
> Scott
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Wen Jia Yang
> Sent: Friday, January 04, 2002 7:05 AM
> To: ccielab@groupstudy.com
> Subject: how to control the baudrate settings?
>
>
> please help me,I can't find the proper URLs on CCO.
>
> for intstance,someone set it to 4800 bps,then I found that by resetting the
> hyperterminal baudrate,then what shall I do?
>
> I once tried to do this,but after I do the following
>
> line con 0
> speed 9600
>
> then I lost all,no response,then what shall i do ?
>
> Thanks in advance.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:16 GMT-3