Re: 2924XL trunk problem

From: Vijay Venkatesh (falcon67@xxxxxxxxx)
Date: Thu Jan 03 2002 - 14:44:21 GMT-3

• Next message: Minh Vuong: "OT: Test Post"
• Previous message: Church, Chuck: "RE: 2924XL trunk problem"
• Maybe in reply to: James Risler: "2924XL trunk problem"
• Next in thread: Mike Schlenger: "RE: 2924XL trunk problem"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Only these combinations of port modes can appear on a single switch:

Multi-VLAN and access ports

Trunk and access ports

Trunk and multi-VLAN ports cannot coexist on the same switch. If you
want to change a multi-VLAN or trunk port into another mode, you must
first change it to an access port and then reassign it to the new
mode

HTH
Vijay.

--- James Risler <jrisler1@tampabay.rr.com> wrote:
> I am attempting to configure trunking on a 2924-XL running IOS
>
> C2900XL Software (C2900XL-HS-M), Version 11.2(8)SA4, RELEASE
> SOFTWARE (
> fc1
>
> Why do I not have the trunk option
>
> 2900SW(config-if)#switchport mode ?
> access Set trunking mode to ACCESS unconditionally
> multi Set trunking mode to multi-VLAN mode
>
> Any thoughts.
>
> James

• Next message: Minh Vuong: "OT: Test Post"
• Previous message: Church, Chuck: "RE: 2924XL trunk problem"
• Maybe in reply to: James Risler: "2924XL trunk problem"
• Next in thread: Mike Schlenger: "RE: 2924XL trunk problem"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:15 GMT-3