From: Mike Schlenger (mschlenger@xxxxxxxxxxxxxxxx)
Date: Thu Jan 03 2002 - 18:40:41 GMT-3
In order to trunk with a 2924XL, you'll need the "EN" model. The EN model
has hardware ASICS that allow you configure trunking. The 2924XL does not
support trunking with this model.
Mike
CCIE #7079
-----Original Message-----
From: Church, Chuck
To: 'James Risler'; 'ccielab@groupstudy.com'
Sent: 1/3/02 11:41 AM
Subject: RE: 2924XL trunk problem
James,
At one time, I think you needed Enterprise version to trunk. If
you've got 8 mb of ram rather than the 4, you should be able to upgrade.
Chuck
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
James Risler
Sent: Thursday, January 03, 2002 12:18 PM
To: ccielab@groupstudy.com
Subject: 2924XL trunk problem
I am attempting to configure trunking on a 2924-XL running IOS
C2900XL Software (C2900XL-HS-M), Version 11.2(8)SA4, RELEASE SOFTWARE (
fc1
Why do I not have the trunk option
2900SW(config-if)#switchport mode ?
access Set trunking mode to ACCESS unconditionally
multi Set trunking mode to multi-VLAN mode
Any thoughts.
James
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:15 GMT-3