From: kyle prevey (preveyk@xxxxxxxxxxx)
Date: Thu Jan 03 2002 - 03:43:23 GMT-3
I have seen a lot of configs on CCO with dialer load-threshold 1 either and
no second dial string. When I do this with the debug on it shows it is
attmepting to bring the second link up because it meets the load threshold
of 1 but it never comes up. When I add a second dial string or map, it
comes up but flaps like a son of gun. The sh dialer says the flapping is
from the overload. I saw nothing for OSPF hellos or anything else causing
it. This could definitely be an issue during the real thing if asked to
have both links active. Once I took the second dial string off the flapping
stopped. The configs in the bootcamp lab show with a second string and
without. So what is right?
I guess in the end it could be the IOS version also since most are riddled
with bugs.
Kyle
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:14 GMT-3