From: Peter Ahremark (pahremark@xxxxxxxxxxxxx)
Date: Wed Jan 02 2002 - 13:34:39 GMT-3
Hi there!
To enable routing over AUX you also need;
int async 1
async default routing
Greetings, Peter
******************************************************************
* s w e d i a *
* Peter Ahremark networks *
* Cisco Certified Network Professional *
* Cisco Certified Design Professional *
* *
* E-mail: peter.ahremark@swedianet.com UIN: 6624952 *
* Snail-mail: J?rnv?gsgatan 14, S-252 25 HELSINGBORG, SWEDEN *
* Phone: +46-42-269619, Fax: +46-42-244588, Mobile: +46-706-099937 *
******************************************************************
----- Original Message -----
From: <tobccie2002@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, January 02, 2002 4:00 PM
Subject: aux with "No Hellos"?????
> hi,dear all,
> firstly,happy new year 2 u all!!! :-)
>
> when i configured 2 routers(2500) with aux which r taken as serial lines,i
met some problem :
>
> R4#sh ip ospf int asy 1
> Async1 is up, line protocol is up
> Internet Address 139.1.1.4/29, Area 1
> Process ID 1, Router ID 139.4.4.4, Network Type POINT_TO_POINT, Cost:
11111
> Transmit Delay is 1 sec, State POINT_TO_POINT,
> Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
> No Hellos (Passive interface) ---------------------PAY ATTENTION
PLZ!!!
> Index 1/5, flood queue length 0
> Next 0x0(0)/0x0(0)
> Last flood scan length is 0, maximum is 0
> Last flood scan time is 0 msec, maximum is 0 msec
> Neighbor Count is 0, Adjacent neighbor count is 0
> Suppress hello for 0 neighbor(s)
> ---------------------------------------
> so,of course ,they CAN'T be neighbors.|
> ---------------------------------------
> and the configuration:
> ......
> interface Async1
> ip address 139.1.1.4 255.255.255.248
> encapsulation ppp
> async dynamic routing
> async mode dedicated
> .........
> line aux 0
> modem InOut
> transport input all
> speed 38400
> flowcontrol hardware
>
>
> yes,it DOES work when i "PING",and i can c each other with "sh cdp nei"
> btw,it DOESN'T work in "eigrp" also!!! ('cauze passive hello,i think)
>
> what's wrong,and how can i correct it?
> thank u all!
>
> tobccie2002
> tobccie2002@yahoo.com
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:14 GMT-3