From: Scott Meeuwsen (scott@xxxxxxxxxxxx)
Date: Sun Dec 30 2001 - 01:39:54 GMT-3
Yes, the ? denotes "Incomplete" which is the least preferred of the 3 BGP
route origin types (IGP, EGP, Incomplete). You will see this anytime you do
redistribution into BGP and will see an i (for IGP) anytime you use a
network statement. I have never seen an EGP origin. My best guess is this
was used for cross-communication with the old EGP routing protocol.
--Scott
----- Original Message -----
From: "Michael Popovich" <m.popovich@home.com>
To: "CCIE GROUPSTUDY" <ccielab@groupstudy.com>
Sent: Saturday, December 29, 2001 9:20 PM
Subject: BGP Incomplete ?
> I am doing a lab where I have an AS200 that I am not advertising any
internal
> networks. I am redistributing EIGRP into BGP. This is the bgp table from
an
> EBGP neighbor in AS300.
>
> Is the reason for the "?" mark for the route path because it is a
> redistributed route? This is my thinking on it.
>
> Network Next Hop Metric LocPrf Weight Path
> *> 190.19.15.64/28 210.10.10.6 0 0 200 ?
> *> 190.19.15.80/28 210.10.10.2 300288 0 200 ?
> * 210.10.10.6 1312512 0 200 ?
> *> 190.19.15.96/28 210.10.10.2 0 0 200 ?
> * 210.10.10.6 1296384 0 200 ?
> *> 192.19.15.0 210.10.10.2 1184512 0 200 ?
> * 210.10.10.6 1696512 0 200 ?
> *> 210.10.10.0/30 210.10.10.2 0 0 200 ?
> * 210.10.10.6 1680384 0 200 ?
> * 210.10.10.4/30 210.10.10.2 1680384 0 200 ?
> *> 210.10.10.6 0 0 200 ?
>
> Thanks,
>
> Michael
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:49 GMT-3