From: Donna Ivey (netgod3@xxxxxxxxxxxxx)
Date: Sat Dec 29 2001 - 02:17:00 GMT-3
7000 RSP1 cannot be upgraded to ver 12.x. I am speaking from experience. I
was able to get mine up to 11.x and would be happy to post the exact version
name come Monday for all.
RSP2 and above can run version 12.x
Donna
----- Original Message -----
From: Asbjorn Hojmark <Asbjorn@Hojmark.ORG>
To: 'David' <david_knot@yahoo.com>
Cc: <ccielab@groupstudy.com>
Sent: Friday, December 28, 2001 2:59 PM
Subject: RE: Cisco 7000 IOS upgarde
> > I can't seem to upgarde the IOS on a Cisco 7010 (with 5 slots).
> > It has IOS 10.3 at the moment.
>
> Can you post a 'sh ver'?
>
> > I've downloaded 12.0(20) GD from Cisco site under RSP7000/7500
> > secton. When I try to load the router it compains that "Error:
> > wrong image for this platform". I've also tried other variations
> > of this IOS ver (see below).
>
> It sounds like you're running RP/SP, not RSP.
> 12.0 is not supported for RP/SP.
>
> -A
> --
> Heroes: Vint Cerf & Bob Kahn, Leonard Kleinrock, Robert Metcalfe
> Links : http://www.hojmark.org/networking/
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:49 GMT-3