From: Brian (signal@xxxxxxxxxx)
Date: Fri Dec 28 2001 - 20:37:07 GMT-3
do you have an rsp7000 in your 7000 or just a regular RP/RP64? "sh diag"
will tell you this
On Fri, 28 Dec 2001, David wrote:
> I can't seem to upgarde the IOS on a Cisco 7010(with 5
> slots). It has IOS 10.3 at the moment. I've downloaded
> 12.0(20) GD from Cisco site under RSP7000/7500 secton.
> When I try to load the router it compains that "Error:
> wrong image for this platform". I've also tried other
> variations of this IOS ver (see below).
>
> Loading rsp-jsv-mz.120-4.T.bin
> %SYS-3-CPUHOG: Task ran for 2908 msec (769/762),
> Process = Boot Load, PC = 319F0
> -Traceback= 164CD8 165246 16352E 1080 1000058E
> %LINK-5-CHANGED: Interface Ethernet0/5, changed state
> to administratively downf!
> [OK - 10421560/57055976 bytes]
> Error: wrong image for this platform
>
>
> This router has RSP1. I wonder if the images I've been
> trying are for RSP2. But then there is no mention of
> this on Cisco site. Any ideas pls.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:49 GMT-3