From: Hansang Bae (hbae@xxxxxxxxxx)
Date: Fri Dec 28 2001 - 01:14:03 GMT-3
At 11:10 AM 12/28/2001 +0800, Clark J wrote:
>[snip]
>R4# show ip rip database
> 135.1.0.0/16 auto-summary
> 135.1.2.0/24
> [1] via 135.1.24.2, 00:00:02, Serial2
> 135.1.4.0/24 directly connected, FastEthernet0
> 135.1.20.0/24
> [1] via 135.1.24.2, 00:00:02, Serial2
> 135.1.24.0/24 directly connected, Serial2
> 135.1.40.0/24 directly connected, Serial0
> 135.1.41.0/24 directly connected, Serial1
> 135.1.43.0/24 directly connected, Serial3
>R4#
>My question is :
> I want R2 only learn 135.1.4.0/24 from R4 , and the routes such as
> 135.1.4x.0/24 will be filtered, yes , it is easy , I can use
> distribute-list to implement it ;
>But I just want R4 don't put 135.1.4x.0/24 into its RIP database , is it
>possible ? Or how can I do ?
Have you tried using offset-list? Perhaps you can remove it by setting
the metric to 16. (inbound or outbound depending on the router). You can
use an access list to specifically match on the routes you want to filter.
hsb
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:48 GMT-3