From: Clark J (clark.j@xxxxxxx)
Date: Fri Dec 28 2001 - 00:10:49 GMT-3
Dear CCIEs and Near CCIEs ,
R2 connects to R4 via their serial interfaces , and RIP is the routing protoco
l ,
R2#sh ip int brief
Interface IP-Address OK? Method Status Protoco
l
Ethernet0 135.1.2.1 YES manual up up
Loopback0 135.1.20.1 YES manual up up
Serial0 135.1.24.2 YES manual up up
Serial1 unassigned YES NVRAM down down
R2#show run
router rip
network 135.1.0.0
no auto-summary
!
R4#sh ip int brief
Interface IP-Address OK? Method Status Pro
tocol
FastEthernet0 135.1.4.1 YES manual up up
Serial0 135.1.40.1 YES manual up up
Serial1 135.1.41.1 YES manual up up
Serial2 135.1.24.4 YES manual up up
Serial3 135.1.43.1 YES manual up up
R4# sh run
!
router rip
passive-interface Serial0
passive-interface Serial1
passive-interface Serial3
network 135.1.0.0
no auto-summary
!
R4# show ip rip database
135.1.0.0/16 auto-summary
135.1.2.0/24
[1] via 135.1.24.2, 00:00:02, Serial2
135.1.4.0/24 directly connected, FastEthernet0
135.1.20.0/24
[1] via 135.1.24.2, 00:00:02, Serial2
135.1.24.0/24 directly connected, Serial2
135.1.40.0/24 directly connected, Serial0
135.1.41.0/24 directly connected, Serial1
135.1.43.0/24 directly connected, Serial3
R4#
My question is :
I want R2 only learn 135.1.4.0/24 from R4 , and the routes such as 135.1.
4x.0/24 will be filtered, yes , it is easy , I can use distribute-list to imple
ment it ;
But I just want R4 don't put 135.1.4x.0/24 into its RIP database , is it possib
le ? Or how can I do ?
Thanks in advance !
Clark J
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:48 GMT-3