From: Paul Grey (p.grey@xxxxxxxxxxxxxx)
Date: Thu Dec 27 2001 - 13:55:38 GMT-3
NLSP uses the node address 0.0.1. So you have created a conflict on R1.
Just change you router id to something other 0.0.1 and away it will go.
Regards
Paul
----- Original Message -----
From: "Scott Meeuwsen" <scott@meeuwsen.org>
To: <ccielab@groupstudy.com>
Sent: Thursday, December 27, 2001 3:49 PM
Subject: Basic NLSP problem...
> I seem to be having a problem with a very simple NLSP setup across an HDLC
> serial link. For some reason I don't get any adjacencies no matter what I
> do. Debugs are showing one of the routers not receiving the others NLSP
IIH
> packets. Please let me know if you have any ideas...thx!
>
> -----
>
> IOS Version: 12.1.9 Enterprise on both routers
>
> What works:
> -IP and IPX across the link (small pings, large pings, and anything else)
> -IP routing (any sort)
> -IPX RIP routing (haven't tried EIGRP yet)
>
> What I have tried:
> -New serial cable
> -Different serial ports on same routers
> -IPXWAN
> -encapsulation ppp
> -More precise area definitions
> -Different internal #'s
> -Power cycling routers
> -Different clock rates
>
> -----
>
> Router 1:
>
> ipx routing 0000.0000.0001
> ipx internal-network 100000
> !
> interface Serial0
> ip address 192.168.21.2 255.255.255.0
> ipx network 12
> ipx nlsp enable
> no fair-queue
> !
> ipx router nlsp
> area-address 0 0
> log-adjacency-changes
> !
> ipx router rip
> no network 12
>
> ------
>
> Router 2:
>
> ipx routing 0000.0000.0002
> ipx internal-network 200000
> !
> interface Serial0
> ip address 192.168.21.1 255.255.255.0
> ipx network 12
> ipx nlsp enable
> no fair-queue
> clockrate 64000
> !
> ipx router nlsp
> area-address 0 0
> log-adjacency-changes
> !
> ipx router rip
> no network 12
>
> ------
>
> Debug ipx nlsp adj on Router 1 (Repeats approx. every 10 seconds):
>
> 01:38:02: NLSP-Adj: Sending serial IIH on Serial0, length 36
>
> ------
>
> Debug ipx nlsp adj on Router 2 (Repeats approx. every 10 seconds):
>
> 01:36:16: NLSP-Adj: Sending serial IIH on Serial0, length 36
> 01:36:17: NLSP-Adj: Rec serial IIH from *HDLC* (Serial0), cir type L1, cir
> id 03, length 36
> 01:36:17: NLSP-Adj: old state INIT, new state INIT
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:48 GMT-3