From: Scott Meeuwsen (scott@xxxxxxxxxxxx)
Date: Thu Dec 27 2001 - 18:11:36 GMT-3
Thanks everyone for your help! It turns out Jim/Paul are correct 0.0.1 is
off limits, with that change it came right up.
----- Original Message -----
From: "Paul Grey" <p.grey@btinternet.com>
To: "Scott Meeuwsen" <scott@meeuwsen.org>
Cc: <ccielab@groupstudy.com>
Sent: Thursday, December 27, 2001 11:55 AM
Subject: Re: Basic NLSP problem...
> NLSP uses the node address 0.0.1. So you have created a conflict on R1.
>
> Just change you router id to something other 0.0.1 and away it will go.
>
> Regards
>
> Paul
>
> ----- Original Message -----
> From: "Scott Meeuwsen" <scott@meeuwsen.org>
> To: <ccielab@groupstudy.com>
> Sent: Thursday, December 27, 2001 3:49 PM
> Subject: Basic NLSP problem...
>
>
> > I seem to be having a problem with a very simple NLSP setup across an
HDLC
> > serial link. For some reason I don't get any adjacencies no matter what
I
> > do. Debugs are showing one of the routers not receiving the others NLSP
> IIH
> > packets. Please let me know if you have any ideas...thx!
> >
> > -----
> >
> > IOS Version: 12.1.9 Enterprise on both routers
> >
> > What works:
> > -IP and IPX across the link (small pings, large pings, and anything
else)
> > -IP routing (any sort)
> > -IPX RIP routing (haven't tried EIGRP yet)
> >
> > What I have tried:
> > -New serial cable
> > -Different serial ports on same routers
> > -IPXWAN
> > -encapsulation ppp
> > -More precise area definitions
> > -Different internal #'s
> > -Power cycling routers
> > -Different clock rates
> >
> > -----
> >
> > Router 1:
> >
> > ipx routing 0000.0000.0001
> > ipx internal-network 100000
> > !
> > interface Serial0
> > ip address 192.168.21.2 255.255.255.0
> > ipx network 12
> > ipx nlsp enable
> > no fair-queue
> > !
> > ipx router nlsp
> > area-address 0 0
> > log-adjacency-changes
> > !
> > ipx router rip
> > no network 12
> >
> > ------
> >
> > Router 2:
> >
> > ipx routing 0000.0000.0002
> > ipx internal-network 200000
> > !
> > interface Serial0
> > ip address 192.168.21.1 255.255.255.0
> > ipx network 12
> > ipx nlsp enable
> > no fair-queue
> > clockrate 64000
> > !
> > ipx router nlsp
> > area-address 0 0
> > log-adjacency-changes
> > !
> > ipx router rip
> > no network 12
> >
> > ------
> >
> > Debug ipx nlsp adj on Router 1 (Repeats approx. every 10 seconds):
> >
> > 01:38:02: NLSP-Adj: Sending serial IIH on Serial0, length 36
> >
> > ------
> >
> > Debug ipx nlsp adj on Router 2 (Repeats approx. every 10 seconds):
> >
> > 01:36:16: NLSP-Adj: Sending serial IIH on Serial0, length 36
> > 01:36:17: NLSP-Adj: Rec serial IIH from *HDLC* (Serial0), cir type L1,
cir
> > id 03, length 36
> > 01:36:17: NLSP-Adj: old state INIT, new state INIT
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:48 GMT-3