From: Fanglo MA (fangloma@xxxxxxxxxxxxxx)
Date: Tue Dec 25 2001 - 11:47:12 GMT-3
Thanks! I got it!!
On Tue, 25 Dec 2001, Paul Grey wrote:
> The bandwith statement should be entered in KBytes., ie 2000 not 200000
>
> So using your config below, you actually get a cost of 0.05 which is
> displayed as 1 on the i/f
>
> Paul
>
>
> ----- Original Message -----
> From: "Fanglo MA" <fangloma@pacific.net.hk>
> To: <ccielab@groupstudy.com>
> Sent: Tuesday, December 25, 2001 1:48 PM
> Subject: OSPF COST & BANDWIDTH
>
>
> > Hi,
> >
> > I just work on a lab need to change the bandwidth to reflect the ospf
> > cost. The speed of the interface is 2000000 and I command the router with
> >
> > int S0
> > bandwidth 2000000
> > router ospf 6
> > auto-cost reference-bandwidth 100
> >
> > I have checked with CCO and it should work to come out 50. But the output
> > from the show ip ospf interface reported cost 1??!!
> >
> > Any suggestion? I use 12.1(11) on 1601.
> >
> > TIA
> > Fanglo
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:47 GMT-3