From: Paul Grey (p.grey@xxxxxxxxxxxxxx)
Date: Tue Dec 25 2001 - 11:25:51 GMT-3
The bandwith statement should be entered in KBytes., ie 2000 not 200000
So using your config below, you actually get a cost of 0.05 which is
displayed as 1 on the i/f
Paul
----- Original Message -----
From: "Fanglo MA" <fangloma@pacific.net.hk>
To: <ccielab@groupstudy.com>
Sent: Tuesday, December 25, 2001 1:48 PM
Subject: OSPF COST & BANDWIDTH
> Hi,
>
> I just work on a lab need to change the bandwidth to reflect the ospf
> cost. The speed of the interface is 2000000 and I command the router with
>
> int S0
> bandwidth 2000000
> router ospf 6
> auto-cost reference-bandwidth 100
>
> I have checked with CCO and it should work to come out 50. But the output
> from the show ip ospf interface reported cost 1??!!
>
> Any suggestion? I use 12.1(11) on 1601.
>
> TIA
> Fanglo
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:47 GMT-3