From: Christopher M. Heffner (cheffner@xxxxxxxxxxxxxxxxxx)
Date: Thu Dec 20 2001 - 13:41:18 GMT-3
Don't forget the newer 2509-RJ and 2511-RJ models do not use the octopus
cables but instead use indidivual RJ-45 cables.
========================================================================
==========
Christopher M. Heffner
IMCR Course Director
Certified Cisco Systems Instructor
CCSI, CCIE, MCT, MCSE, MCNI, MCNE, CLI, PCLP, ASE, CTT, A+
cheffner@certified-labs.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Brian Dennis
Sent: Wednesday, December 05, 2001 10:04 AM
To: Ccie Lab Group (E-mail)
Subject: RE: OT - 2509 vs. 2511
Don't forget about the aux port. It will allow you to hook up the 9th
device
to a 2509 and the 17th to a 2511.
Brian Dennis, CCIE #2210 (R&S)(ISP/Dial) CCSI #98640
5G Networks, Inc.
bdennis@5g.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Parrish, Ben
Sent: Wednesday, December 05, 2001 6:34 AM
To: 'Beamish, Richard'; Ccie Lab Group (E-mail)
Subject: RE: OT - 2509 vs. 2511
Dick,
The 2509 has 8 async ports and the 2511 has 16. So if you have more
than
8 routers, modems, etc... that you want to connect to, use the 2511.
Benjamin Parrish
Customer Engineering
NetSolve, Inc.
Austin Network Management Center
-----Original Message-----
From: Beamish, Richard [mailto:Richard.Beamish@Getroni csGov.com]
Sent: Wednesday, December 05, 2001 6:50 AM
To: Ccie Lab Group (E-mail)
Subject: OT - 2509 vs. 2511
Need to verify that the only difference between a 2509 and 2511
(w/octopus cables) is the actual octopus cable.
Thanks
Dick Beamish
Getronics Government Solutions
richard.beamish@getronicsgov.com
Cell: 301.806.4280
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:45 GMT-3