From: Rodgers Moore (rodgers@xxxxxxxxxxxxxx)
Date: Mon Dec 17 2001 - 13:35:22 GMT-3
I think what you should notice is the offset value is 0 to 16. This implies
that it is not "additive", but absolute. How could you add 16 to the existing
hop count?
meaning "offset-list 0 out 1 serial 0/0" would set the outgoing hop count to 1
for all routes exiting serial 0/0. No matter what the real hop count is on
the original route(s).
Rodgers Moore, CCIE# 8153
Jeongwoo Park wrote:
> Hi all
> For example can I change the routes that is 3 hops away to 1 hop to routes
> that are 1 hop away?
> I know how to do it backward.
>
> Thanks in adv.
>
> JP
-- Rodgers Moore, CCIE #8153, CCNP-Security, CCDP Design and Security Consultant
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:44 GMT-3