From: kym blair (kymblair@xxxxxxxxxxx)
Date: Mon Dec 17 2001 - 00:52:29 GMT-3
Steve,
One way to decrement RIPs hop count would be during redistribution; you
could add a route-map then under the route map "set metric - ###". Not very
useful with rip though since rip doesn't have a process ID so you would only
be redistributing from some other IGP or connected or static. This is a
good mechanism to lower another IGP's metric if you were going into
something beside rip.
Kym
>From: Jeongwoo Park <Jpark@wams.com>
>Reply-To: Jeongwoo Park <Jpark@wams.com>
>To: "'Stephen C. Feldberg'" <scfeldberg@hotmail.com>,
>ccielab@groupstudy.com, "'basel@tashkandi.com'"
><basel@tashkandi.com>
>Subject: RE: offset-list subtract rip count !!
>Date: Sun, 16 Dec 2001 17:43:50 -0800
>
>Thanks for the reply.
>I was just curious when I saw this;
>
>Router(config)#router rip
>Router(config-router)#?
>Router configuration commands:
> address-family Enter Address Family command mode
> auto-summary Enable automatic network number summarization
> default Set a command to its defaults
> default-information Control distribution of default information
> default-metric Set metric of redistributed routes
> distance Define an administrative distance
> distribute-list Filter networks in routing updates
> exit Exit from routing protocol configuration mode
> flash-update-threshold Specify flash update threshold in second
> help Description of the interactive help system
> input-queue Specify input queue depth
> maximum-paths Forward packets over multiple paths
> neighbor Specify a neighbor router
> network Enable routing on an IP network
> no Negate a command or set its defaults
> offset-list Add or subtract offset from IGRP or RIP metrics
><-- ?
> output-delay Interpacket delay for RIP updates
>
>
>Regards
>
>JP
>-----Original Message-----
>From: Stephen C. Feldberg [mailto:scfeldberg@hotmail.com]
>Sent: Sunday, December 16, 2001 5:21 PM
>To: Jeongwoo Park; ccielab@groupstudy.com
>Subject: Re: offset-list subtract rip count !!
>
>
>As far as I know, the offset-list command can be used to increment, but not
>to decrement the hop count metric. Explore the options of implementing
>tunnels or redistributing the routes into another IGP to extend the RIP
>routes to the desired location within the routing domain.
>
>Steve
>----- Original Message -----
>From: "Jeongwoo Park" <Jpark@wams.com>
>To: <ccielab@groupstudy.com>
>Sent: Sunday, December 16, 2001 6:42 PM
>Subject: offset-list subtract rip count !!
>
>
> > Hi all
> > For example can I change the routes that is 3 hops away to 1 hop to
>routes
> > that are 1 hop away?
> > I know how to do it backward.
> >
> > Thanks in adv.
> >
> > JP
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:44 GMT-3