From: Phil (ciscostudent1@xxxxxxxxxxxx)
Date: Fri Dec 14 2001 - 17:01:32 GMT-3
This looks like the NP-2T connector in the 4000 series. Take a look:
http://www.cisco.com/warp/public/534/17.html
Phil.
Chad Allison <chad.allison@mindspring.com> escreveu: All,
I acquired an old IGS router when I purchased a friend's bundle of CCIE
prep equip. Anyway, it's running ios 9.0(1). Hold the laughter
please... It has an ethernet int which will be good for something I
guess. Also, it has a serial. Not a standard 60-pin but it's actually
50-pin. It looks like a fat DB-25. Does anyone have a clue where I can
get a cable for this or what the hell it's called? Ideally I could go
back-to-back with one of my 2500s which, of course, means I would be
going from this 50-pin freak interface to a standard Cisco 60-pin
serial. Is this possible?
Any input would be much appreciated!
Chad Allison
Sr. Network Engineer
CCNP, CCDP
---------------------------------
Yahoo! GeoCities
Tenha seu lugar na Web. Construa hoje mesmo sua home page no Yahoo! GeoCities.
I facil e gratis!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:43 GMT-3