From: Michael Burke (mfburke@xxxxxxxxxx)
Date: Fri Dec 14 2001 - 18:11:49 GMT-3
www.pacificcable.com.
----- Original Message -----
From: "Phil" <ciscostudent1@yahoo.com.br>
To: "Chad Allison" <chad.allison@mindspring.com>; <ccielab@groupstudy.com>
Sent: Friday, December 14, 2001 3:01 PM
Subject: Re: IGS router/bridge
> This looks like the NP-2T connector in the 4000 series. Take a look:
> http://www.cisco.com/warp/public/534/17.html
> Phil.
>
> Chad Allison <chad.allison@mindspring.com> escreveu: All,
>
> I acquired an old IGS router when I purchased a friend's bundle of CCIE
> prep equip. Anyway, it's running ios 9.0(1). Hold the laughter
> please... It has an ethernet int which will be good for something I
> guess. Also, it has a serial. Not a standard 60-pin but it's actually
> 50-pin. It looks like a fat DB-25. Does anyone have a clue where I can
> get a cable for this or what the hell it's called? Ideally I could go
> back-to-back with one of my 2500s which, of course, means I would be
> going from this 50-pin freak interface to a standard Cisco 60-pin
> serial. Is this possible?
>
> Any input would be much appreciated!
>
> Chad Allison
> Sr. Network Engineer
> CCNP, CCDP
> ---------------------------------
> Yahoo! GeoCities
> Tenha seu lugar na Web. Construa hoje mesmo sua home page no Yahoo!
GeoCities. I facil e gratis!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:43 GMT-3