From: Liu Jianxin-qch1927 (Jianxin.Liu@xxxxxxxxxxx)
Date: Mon Dec 10 2001 - 00:05:03 GMT-3
Yesterday somebody mentioned the 1 is the lowest value.
But I check the CD, the range is from 0 to 65535.
set spantree priority 0 should be the right answer.
-----Original Message-----
From: Albert Lu [mailto:albert_ccie@yahoo.com]
Sent: Sunday, December 09, 2001 6:46 PM
To: 'Mas Kato'
Cc: ccielab@groupstudy.com
Subject: RE: Root Bridge
So what does setting the port priority to 8192 do? Isn't that the magic
number?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Mas Kato
Sent: Sunday, December 09, 2001 7:11 PM
To: ccielab@groupstudy.com; c_ccie@hotmail.com
Subject: RE: Root Bridge
[demime could not interpret encoding binary - treating as plain text]
To assure it, use the 'set spantree priority 0' command.
Regards,
Mas Kato
https://ecardfile.com.id/mkato
> "CCIE Cisco" <c_ccie@hotmail.com> ccielab@groupstudy.com Root BridgeDate:
Sat, 08 Dec 2001 22:00:48 -0500
>Reply-To: "CCIE Cisco" <c_ccie@hotmail.com>
>
>Hi,
>
>what is the command to make Catalyst5000 as root bridge without using
>spantree root command.
>
>Thanks
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:40 GMT-3