From: Hans (yyao@xxxxxxxxxxxx)
Date: Sun Dec 09 2001 - 16:26:19 GMT-3
Hi Basel,
I will have a try and let you know the result.
Thanks,
Hans
----- Original Message -----
From: "Basel Tashkandi" <basel@cisco.com>
To: "Hans" <yyao@sympatico.ca>
Cc: <ccielab@groupstudy.com>
Sent: Sunday, December 09, 2001 12:43 PM
Subject: RE: console not working
> Hi Hans,
> I think if this is the case we need to do more investigation. try
connecting
> the 2 routers to a hub and do a debug for all ip packets and see what
comes
> out. Even better if you have a sniffer capture whats coming out of that
> interface and lets see.
>
> regards
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Hans
> Sent: 09 December 2001 12:23
> To: Basel Tashkandi
> Cc: ccielab@groupstudy.com
> Subject: Re: console not working
>
>
> Hi Basel,
>
> Thanks for your reply. I think the same as you did at first. However, when
I
> checked problematic router, I found the LED of the ethernet port connected
> with cable kept flashing, that means the ethernet port is up. I also
tried
> to connect that ethernet port with my computer NIC, my the LED of my
> computer' NIC is also green(up).
>
> Can you please help me out?
>
> Thanks,
>
> Hans
>
>
> ----- Original Message -----
> From: "Basel Tashkandi" <basel@tashkandi.com>
> To: "Hans" <yyao@sympatico.ca>
> Cc: <ccielab@groupstudy.com>
> Sent: Sunday, December 09, 2001 3:57 AM
> Subject: Re: console not working
>
>
> > Hi Hans,
> > The reason for not seeing the router by CDP from the second router is
> > because when you erased the configuration file the router interfaces
> > default status is shut down. Hence you don't have configuration file to
> > change that it will remain on shut status.
> >
> > regards
> > At 21:56 08/12/2001 -0500, Hans wrote:
> > >Hi Basel,
> > >
> > >Thanks for your reply. I also think there must be something wrong woth
> the
> > >console port. However, why I can see this problem router by using show
> cdp
> > >neighbor on other working router? Is it because I reboot the router
after
> I
> > >erase start?
> > >
> > >Thanks again,
> > >
> > >Hans
> > >
> > >----- Original Message -----
> > >From: "Basel Tashkandi" <basel@tashkandi.com>
> > >To: "Hans" <yyao@sympatico.ca>
> > >Cc: <ccielab@groupstudy.com>
> > >Sent: Saturday, December 08, 2001 8:41 PM
> > >Subject: Re: console not working
> > >
> > >
> > > > Hi Hans
> > > > Try this link for several options of AutoInstall
> > > >
> >
>
>http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/fun_
> c
> > >/fcprt1/fccfgtoo.htm#xtocid120104
> > > >
> > > > I believe your Console port is damaged you might want to check with
> the
> > > > place you bought the router from for support or maintenance
> > > >
> > > > Thanks
> > > > At 18:58 08/12/2001 -0500, Hans wrote:
> > > > >All,
> > > > >
> > > > >Thanks for your reply. I can not access to the router either
through
> > >console
> > > > >or through aux. I have tried to different com speed from 110 to
> 115200
> > >for
> > > > >both console and aux. It did not work. I also have the ethernet
port
> > > > >connected to another Cisco router, I did show cdp neighbor on the
> other
> > > > >router, I can not find the problem router.
> > > > >
> > > > >Again the syndrome:
> > > > >
> > > > >The router works fine yesterday. Today, when I have it booted and
> > >telneted
> > > > >on it, everything seems to be fine. However when I try to
connected
> it
> > > > >using the console port, nothing shows up on my screen. Therefore I
> > >telneted
> > > > >onto it again and did erase start and reload, after that, I lost
> > >everthing.
> > > > >I tried different berak sequences, none of them is working.
> > > > >
> > > > >I keep power if off and on and tried the return key, nothing shows
up
> on
> > > > >console port. However, everytime I power it up, I can see a "p"
using
> the
> > > > >aux port. I did the same thing to other working router, I saw an
"o"
> on
> > >the
> > > > >aux port.
> > > > >
> > > > >Hi Basel, can you please let me know how to do auto-install on the
> > >router?
> > > > >It is a Cisco 2507 8M/8M.
> > > > >
> > > > >Thanks all for your help!
> > > > >
> > > > >Hans
> > > > >
> > > > >
> > > > >
> > > > >----- Original Message -----
> > > > >From: "Basel Tashkandi" <basel@tashkandi.com>
> > > > >To: "Phil" <ciscostudent1@yahoo.com.br>
> > > > >Cc: "Hans" <yyao@sympatico.ca>; <ccielab@groupstudy.com>
> > > > >Sent: Saturday, December 08, 2001 6:20 PM
> > > > >Subject: Re: console not working
> > > > >
> > > > >
> > > > > > when you press the return key do you get any kind of response or
> > >nothing
> > > > >at
> > > > > > all.ho
> > > > > > If you do then you might want to try changing your com port
speed
> > > > > >
> > > > > > If this doesn't work try the auto-install feature to put some
> > > > >configuration
> > > > > > on the router
> > > > > >
> > > > > > At 18:26 08/12/2001 -0300, Phil wrote:
> > > > > > > Hans,
> > > > > > >You can try to connect this router to another router via
ethernet
> or
> > > > > > >serial and if the interfaces are not shutdown and cdp is
running
> > >you'll
> > > > >be
> > > > > > >able to see the router as a cdp neighbor.
> > > > > > >
> > > > > > > Hans <yyao@sympatico.ca> escreveu: Hi there,
> > > > > > >
> > > > > > >My console of Cisco 2507 router is not working(it is working
fine
> > > > > > >yesterday). When I power up the router, nothing shows up. I
have
> > >checked
> > > > >the
> > > > > > >console cable with other routers, it is working fine. I connect
> the
> > > > >console
> > > > > > >cable to the aux port when I power up the router, a "p"
displayed
> > >then
> > > > > > >nothing shows up anymore. When I did the same thing to other
> working
> > > > >router,
> > > > > > >"o" is displayed and then it enters into prompt mode. There is
> not ip
> > > > > > >address assigned on any of the interfaces, so console/aux is
the
> only
> > >way
> > > > > > >for me to accesss the router.
> > > > > > >
> > > > > > >Can anyone please help me,
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >Thanks a million.
> > > > > > >
> > > > > > >Hans
> > > > > > >---------------------------------
> > > > > > >Yahoo! GeoCities
> > > > > > >Tenha seu lugar na Web. Construa hoje mesmo sua home page no
> Yahoo!
> > > > > > >GeoCities. I facil e gratis!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:40 GMT-3