From: Basel Tashkandi (basel@xxxxxxxxxxxxx)
Date: Sun Dec 09 2001 - 05:57:52 GMT-3
Hi Hans,
The reason for not seeing the router by CDP from the second router is
because when you erased the configuration file the router interfaces
default status is shut down. Hence you don't have configuration file to
change that it will remain on shut status.
regards
At 21:56 08/12/2001 -0500, Hans wrote:
>Hi Basel,
>
>Thanks for your reply. I also think there must be something wrong woth the
>console port. However, why I can see this problem router by using show cdp
>neighbor on other working router? Is it because I reboot the router after I
>erase start?
>
>Thanks again,
>
>Hans
>
>----- Original Message -----
>From: "Basel Tashkandi" <basel@tashkandi.com>
>To: "Hans" <yyao@sympatico.ca>
>Cc: <ccielab@groupstudy.com>
>Sent: Saturday, December 08, 2001 8:41 PM
>Subject: Re: console not working
>
>
> > Hi Hans
> > Try this link for several options of AutoInstall
> >
>http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/fun_c
>/fcprt1/fccfgtoo.htm#xtocid120104
> >
> > I believe your Console port is damaged you might want to check with the
> > place you bought the router from for support or maintenance
> >
> > Thanks
> > At 18:58 08/12/2001 -0500, Hans wrote:
> > >All,
> > >
> > >Thanks for your reply. I can not access to the router either through
>console
> > >or through aux. I have tried to different com speed from 110 to 115200
>for
> > >both console and aux. It did not work. I also have the ethernet port
> > >connected to another Cisco router, I did show cdp neighbor on the other
> > >router, I can not find the problem router.
> > >
> > >Again the syndrome:
> > >
> > >The router works fine yesterday. Today, when I have it booted and
>telneted
> > >on it, everything seems to be fine. However when I try to connected it
> > >using the console port, nothing shows up on my screen. Therefore I
>telneted
> > >onto it again and did erase start and reload, after that, I lost
>everthing.
> > >I tried different berak sequences, none of them is working.
> > >
> > >I keep power if off and on and tried the return key, nothing shows up on
> > >console port. However, everytime I power it up, I can see a "p" using the
> > >aux port. I did the same thing to other working router, I saw an "o" on
>the
> > >aux port.
> > >
> > >Hi Basel, can you please let me know how to do auto-install on the
>router?
> > >It is a Cisco 2507 8M/8M.
> > >
> > >Thanks all for your help!
> > >
> > >Hans
> > >
> > >
> > >
> > >----- Original Message -----
> > >From: "Basel Tashkandi" <basel@tashkandi.com>
> > >To: "Phil" <ciscostudent1@yahoo.com.br>
> > >Cc: "Hans" <yyao@sympatico.ca>; <ccielab@groupstudy.com>
> > >Sent: Saturday, December 08, 2001 6:20 PM
> > >Subject: Re: console not working
> > >
> > >
> > > > when you press the return key do you get any kind of response or
>nothing
> > >at
> > > > all.ho
> > > > If you do then you might want to try changing your com port speed
> > > >
> > > > If this doesn't work try the auto-install feature to put some
> > >configuration
> > > > on the router
> > > >
> > > > At 18:26 08/12/2001 -0300, Phil wrote:
> > > > > Hans,
> > > > >You can try to connect this router to another router via ethernet or
> > > > >serial and if the interfaces are not shutdown and cdp is running
>you'll
> > >be
> > > > >able to see the router as a cdp neighbor.
> > > > >
> > > > > Hans <yyao@sympatico.ca> escreveu: Hi there,
> > > > >
> > > > >My console of Cisco 2507 router is not working(it is working fine
> > > > >yesterday). When I power up the router, nothing shows up. I have
>checked
> > >the
> > > > >console cable with other routers, it is working fine. I connect the
> > >console
> > > > >cable to the aux port when I power up the router, a "p" displayed
>then
> > > > >nothing shows up anymore. When I did the same thing to other working
> > >router,
> > > > >"o" is displayed and then it enters into prompt mode. There is not ip
> > > > >address assigned on any of the interfaces, so console/aux is the only
>way
> > > > >for me to accesss the router.
> > > > >
> > > > >Can anyone please help me,
> > > > >
> > > > >
> > > > >
> > > > >Thanks a million.
> > > > >
> > > > >Hans
> > > > >---------------------------------
> > > > >Yahoo! GeoCities
> > > > >Tenha seu lugar na Web. Construa hoje mesmo sua home page no Yahoo!
> > > > >GeoCities. I facil e gratis!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:40 GMT-3