From: Basel Tashkandi (basel@xxxxxxxxxxxxx)
Date: Sat Dec 08 2001 - 22:41:38 GMT-3
Hi Hans
Try this link for several options of AutoInstall
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/fun_c/fc
prt1/fccfgtoo.htm#xtocid120104
I believe your Console port is damaged you might want to check with the
place you bought the router from for support or maintenance
Thanks
At 18:58 08/12/2001 -0500, Hans wrote:
>All,
>
>Thanks for your reply. I can not access to the router either through console
>or through aux. I have tried to different com speed from 110 to 115200 for
>both console and aux. It did not work. I also have the ethernet port
>connected to another Cisco router, I did show cdp neighbor on the other
>router, I can not find the problem router.
>
>Again the syndrome:
>
>The router works fine yesterday. Today, when I have it booted and telneted
>on it, everything seems to be fine. However when I try to connected it
>using the console port, nothing shows up on my screen. Therefore I telneted
>onto it again and did erase start and reload, after that, I lost everthing.
>I tried different berak sequences, none of them is working.
>
>I keep power if off and on and tried the return key, nothing shows up on
>console port. However, everytime I power it up, I can see a "p" using the
>aux port. I did the same thing to other working router, I saw an "o" on the
>aux port.
>
>Hi Basel, can you please let me know how to do auto-install on the router?
>It is a Cisco 2507 8M/8M.
>
>Thanks all for your help!
>
>Hans
>
>
>
>----- Original Message -----
>From: "Basel Tashkandi" <basel@tashkandi.com>
>To: "Phil" <ciscostudent1@yahoo.com.br>
>Cc: "Hans" <yyao@sympatico.ca>; <ccielab@groupstudy.com>
>Sent: Saturday, December 08, 2001 6:20 PM
>Subject: Re: console not working
>
>
> > when you press the return key do you get any kind of response or nothing
>at
> > all.ho
> > If you do then you might want to try changing your com port speed
> >
> > If this doesn't work try the auto-install feature to put some
>configuration
> > on the router
> >
> > At 18:26 08/12/2001 -0300, Phil wrote:
> > > Hans,
> > >You can try to connect this router to another router via ethernet or
> > >serial and if the interfaces are not shutdown and cdp is running you'll
>be
> > >able to see the router as a cdp neighbor.
> > >
> > > Hans <yyao@sympatico.ca> escreveu: Hi there,
> > >
> > >My console of Cisco 2507 router is not working(it is working fine
> > >yesterday). When I power up the router, nothing shows up. I have checked
>the
> > >console cable with other routers, it is working fine. I connect the
>console
> > >cable to the aux port when I power up the router, a "p" displayed then
> > >nothing shows up anymore. When I did the same thing to other working
>router,
> > >"o" is displayed and then it enters into prompt mode. There is not ip
> > >address assigned on any of the interfaces, so console/aux is the only way
> > >for me to accesss the router.
> > >
> > >Can anyone please help me,
> > >
> > >
> > >
> > >Thanks a million.
> > >
> > >Hans
> > >---------------------------------
> > >Yahoo! GeoCities
> > >Tenha seu lugar na Web. Construa hoje mesmo sua home page no Yahoo!
> > >GeoCities. I facil e gratis!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:40 GMT-3