From: Dennis.D.Adekola@xxxxxxxxxxxxxxxxxx
Date: Sat Dec 08 2001 - 22:30:00 GMT-3
Hans
Have you tried playing round with the text settings
Also changing the rollover cable might bring you some luck
Dennis
yyao@sympatico.ca on 09/12/2001 00:10:00
To: basel
ciscostudent1
cc: ccielab
raj_lab
bcc: Dennis Adekola
Subject: Re: console not working
Reply-To: yyao@sympatico.ca@INTERNET
All,
Thanks for your reply. I can not access to the router either through
console
or through aux. I have tried to different com speed from 110 to 115200 for
both console and aux. It did not work. I also have the ethernet port
connected to another Cisco router, I did show cdp neighbor on the other
router, I can not find the problem router.
Again the syndrome:
The router works fine yesterday. Today, when I have it booted and telneted
on it, everything seems to be fine. However when I try to connected it
using the console port, nothing shows up on my screen. Therefore I telneted
onto it again and did erase start and reload, after that, I lost everthing.
I tried different berak sequences, none of them is working.
I keep power if off and on and tried the return key, nothing shows up on
console port. However, everytime I power it up, I can see a "p" using the
aux port. I did the same thing to other working router, I saw an "o" on the
aux port.
Hi Basel, can you please let me know how to do auto-install on the router?
It is a Cisco 2507 8M/8M.
Thanks all for your help!
Hans
----- Original Message -----
From: "Basel Tashkandi" <basel@tashkandi.com>
To: "Phil" <ciscostudent1@yahoo.com.br>
Cc: "Hans" <yyao@sympatico.ca>; <ccielab@groupstudy.com>
Sent: Saturday, December 08, 2001 6:20 PM
Subject: Re: console not working
> when you press the return key do you get any kind of response or nothing
at
> all.ho
> If you do then you might want to try changing your com port speed
>
> If this doesn't work try the auto-install feature to put some
configuration
> on the router
>
> At 18:26 08/12/2001 -0300, Phil wrote:
> > Hans,
> >You can try to connect this router to another router via ethernet or
> >serial and if the interfaces are not shutdown and cdp is running you'll
be
> >able to see the router as a cdp neighbor.
> >
> > Hans <yyao@sympatico.ca> escreveu: Hi there,
> >
> >My console of Cisco 2507 router is not working(it is working fine
> >yesterday). When I power up the router, nothing shows up. I have checked
the
> >console cable with other routers, it is working fine. I connect the
console
> >cable to the aux port when I power up the router, a "p" displayed then
> >nothing shows up anymore. When I did the same thing to other working
router,
> >"o" is displayed and then it enters into prompt mode. There is not ip
> >address assigned on any of the interfaces, so console/aux is the only
way
> >for me to accesss the router.
> >
> >Can anyone please help me,
> >
> >
> >
> >Thanks a million.
> >
> >Hans
> >---------------------------------
> >Yahoo! GeoCities
> >Tenha seu lugar na Web. Construa hoje mesmo sua home page no Yahoo!
> >GeoCities. I facil e gratis!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:40 GMT-3