From: DAN DORTON (DHSTS68@xxxxxxxxxxxxxxx)
Date: Mon Dec 03 2001 - 13:52:48 GMT-3
Thanks for the link.
Will do!
>>> Jim Brown <Jim.Brown@CaseLogic.com> 12/03/01 10:49AM >>>
Dan,
Check out this link:
http://www.cisco.com/warp/public/104/dcprob.html
If I remember this lab correctly it is because of the host routes on
the
ISDN interfaces. Take a look at the link, the information is very
enlightening.
-----Original Message-----
From: DAN DORTON [mailto:DHSTS68@dhs.state.il.us]
Sent: Monday, December 03, 2001 9:35 AM
To: ccielab@groupstudy.com
Subject: CCbootcamp lab 8A.
Anyone successfully get the OSPF demand circuit working here? I have
tried
everything, but I am still processing 224.0.0.5's across the BRI in
both
directions.
I finally gave up & looked at the configs that CC sent, but they match
mine
almost perfectly!
What the????
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname r6
!
!
username r5 password 0 cisco
ip subnet-zero
no ip domain-lookup
!
ip ssh time-out 120
ip ssh authentication-retries 3
isdn switch-type basic-ni
!
!
!
!
interface Loopback0
ip address 137.20.60.1 255.255.240.0
!
interface Ethernet0
ip address 137.20.64.6 255.255.240.0
ip ospf priority 255
standby ip 137.20.64.8
standby timers 5 10
standby authentication cisco
!
interface Serial0
ip address 137.20.86.1 255.255.255.0
clockrate 2000000
!
interface BRI0
bandwidth 64
ip address 137.20.224.6 255.255.240.0
encapsulation ppp
ip ospf network point-to-point
ip ospf demand-circuit
dialer map ip 137.20.224.5 name r5 broadcast 18008358662 dialer-group
1
isdn switch-type basic-ni isdn spid1 0835866101 8358661 isdn spid2
0835866301 8358663 no cdp enable ppp authentication chap ! router
ospf 1
log-adjacency-changes redistribute connected metric 20 subnets
route-map
filtercon redistribute bgp 2 metric 20 subnets route-map bgp2ospf
network
137.20.48.0 0.0.15.255 area 0 network 137.20.64.0 0.0.15.255 area 0
network 137.20.224.0 0.0.15.255 area 0 ! router bgp 2 bgp
log-neighbor-changes network 137.20.86.0 mask 255.255.255.0
redistribute
ospf 1 route-map ospf2bgp neighbor 137.20.25.2 remote-as 2 neighbor
137.20.25.2 update-source Loopback0 neighbor 137.20.86.2 remote-as 1
neighbor 137.20.86.2 default-originate no auto-summary ! ip classless
no ip
http server ip pim bidir-enable ! access-list 1 permit 137.20.86.0
0.0.0.255
access-list 10 permit 172.168.70.0 0.0.0.255 access-list 10 permit
137.20.10.0 0.0.0.255 access-list 10 permit 160.0.0.0 0.255.255.255
access-list 20 permit 137.20.224.0 0.0.0.255 access-list 30 permit
137.20.81.0 0.0.0.255 access-list 30 permit 137.20.82.0 0.0.0.255
access-list 40 permit any dialer-list 1 protocol ip permit route-map
ospf2bgp deny 10 match ip address 20 ! route-map ospf2bgp permit 20
match
route-type internal ! route-map ospf2bgp deny 30 match ip address 10
!
route-map ospf2bgp permit 40 match route-type external ! route-map
bgp2ospf
deny 10 match ip address 30 ! route-map bgp2ospf permit 20 match ip
address 40 ! route-map filtercon permit 10 match ip address 1 ! ! line
con
0 exec-timeout 0 0 logging synchronous line vty 0 4 exec-timeout 0
0
login ! end
r6#sh ip ospf int bri 0
BRI0 is up, line protocol is up (spoofing)
Internet Address 137.20.224.6/20, Area 0
Process ID 1, Router ID 137.20.60.1, Network Type POINT_TO_POINT,
Cost: 1562
Configured as demand circuit.
Run as demand circuit.
DoNotAge LSA allowed.
Transmit Delay is 1 sec, State POINT_TO_POINT,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:01
Index 3/3, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 2, maximum is 2
Last flood scan time is 0 msec, maximum is 8 msec
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 137.20.240.1 (Hello suppressed)
Suppress hello for 1 neighbor(s)
r6#sh ip ospf ne
Neighbor ID Pri State Dead Time Address
Interface
137.20.240.1 1 FULL/ - - 137.20.224.5 BRI0
137.20.240.1 1 FULL/BDR 00:00:39 137.20.64.5
Ethernet0
version 11.3
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname r5
!
!
username r6 password 0 cisco
memory-size iomem 15
ip subnet-zero
no ip domain-lookup
isdn switch-type basic-ni
!
!
!
!
!
!
process-max-time 200
!
interface Loopback0
ip address 137.20.240.1 255.255.240.0
!
interface BRI0/0
ip address 137.20.224.5 255.255.240.0
encapsulation ppp
ip ospf demand-circuit
bandwidth 64
dialer map ip 137.20.224.6 name r6 broadcast 18008358661 dialer-group
1
isdn switch-type basic-ni isdn spid1 0835866201 8358662 isdn spid2
0835866401 8358664 no cdp enable ppp authentication chap hold-queue
75 in
! interface Ethernet0/0 ip address 137.20.64.5 255.255.240.0 no ip
redirects standby timers 5 10 standby priority 200 standby preempt
standby authentication cisco standby ip 137.20.64.8 ! interface
Serial0/0
no ip address encapsulation frame-relay no ip mroute-cache keepalive
15
no fair-queue no frame-relay inverse-arp frame-relay lmi-type ansi !
interface Serial0/0.1 multipoint ip address 137.20.100.34
255.255.255.224
ip ospf network point-to-multipoint frame-relay map ip 137.20.100.33
501
broadcast frame-relay map ip 137.20.100.34 501 broadcast frame-relay
map
ip 137.20.100.35 503 broadcast no frame-relay inverse-arp ! interface
Serial0/0.2 point-to-point ip address 137.20.200.17 255.255.255.240
frame-relay interface-dlci 504 ! interface TokenRing0/0 no ip address
shutdown ring-speed 16 ! interface Serial0/1 ip address 137.20.25.1
255.255.255.0 clockrate 2000000 ! router ospf 1 redistribute igrp 1
metric
100 metric-type 1 subnets route-map igrp2ospf network 137.20.25.0
0.0.0.255
area 2 network 137.20.64.0 0.0.15.255 area 0 network 137.20.100.32
0.0.0.31 area 1 network 137.20.224.0 0.0.15.255 area 0 network
137.20.240.0 0.0.15.255 area 0 area 1 virtual-link 200.200.100.1 area
1
virtual-link 137.20.33.33 ! router igrp 1 redistribute ospf 1 metric
1544
20000 255 1 1500 passive-interface BRI0/0 passive-interface
Ethernet0/0
passive-interface Serial0/0.1 passive-interface Serial0/1 network
137.20.0.0 ! ip classless ip route 137.20.81.0 255.255.255.0
137.20.60.1 ip
route 137.20.82.0 255.255.255.0 137.20.60.1 ! access-list 1 permit
137.20.100.32 0.0.0.31 access-list 1 permit 137.20.240.0 0.0.0.255
access-list 1 permit 137.20.64.0 0.0.0.255 access-list 1 permit
137.20.224.0
0.0.0.255 access-list 2 permit any dialer-list 1 protocol ip permit
route-map igrp2ospf deny 10 match ip address 1 ! route-map igrp2ospf
permit
20 match ip address 2 ! ! line con 0 exec-timeout 0 0 logging
synchronous
line aux 0 line vty 0 4 exec-timeout 0 0 login ! no scheduler
allocate end
r5#sh ip ospf int bri 0/0
BRI0/0 is up, line protocol is up (spoofing)
Internet Address 137.20.224.5/20, Area 0
Process ID 1, Router ID 137.20.240.1, Network Type POINT_TO_POINT,
Cost: 1562
Run as demand circuit.
DoNotAge LSA allowed.
Transmit Delay is 1 sec, State POINT_TO_POINT,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:02
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 137.20.60.1 (Hello suppressed)
Suppress hello for 1 neighbor(s)
r5#sh ip ospf ne
Neighbor ID Pri State Dead Time Address
Interface
137.20.60.1 1 FULL/ - 00:00:39 137.20.224.6
BRI0/0
137.20.60.1 255 FULL/DR 00:00:35 137.20.64.6
Ethernet0/0
200.200.100.1 1 FULL/ - 00:01:59 137.20.100.33
Serial0/0.1
137.20.33.33 1 FULL/ - 00:01:55 137.20.100.35
Serial0/0.1
137.20.25.2 1 FULL/ - 00:00:38 137.20.25.2
Serial0/1
Thanks much!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:36 GMT-3