From: Shahram Esfahani (sham@xxxxxxxxxxxx)
Date: Sun Dec 02 2001 - 00:33:26 GMT-3
I think you meant to say that the 'set port host' macro turns OFF
trunking/channeling on the specified ports.
Shahram
On Sat, 1 Dec 2001, Asbjorn Hojmark wrote:
> > If specified to set up a trunk link on port 2/8, should I turn
> > trunking off on all the other ports? If you take a look at the
> > config below, it sets all the other ports as auto.
>
> In the Real World(TM), I prefer to hardcode link parameters such
> as trunking and channeling, because that will make the link come
> up faster and help convergence in case of a link failure/recove-
> ry. And you will know precisely what is going on.
>
> For host ports, you can use the macro 'set port host', which
> turns on trunking and channeling and turns on STP PortFast. In
> less recent version of CatOS, you'll have to do the three manu-
> ally.
>
> HTH,
> -A
> --
> Heroes: Vint Cerf & Bob Kahn, Leonard Kleinrock, Robert Metcalfe
> Links : http://www.hojmark.org/networking/
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:35 GMT-3