From: Joseph Ezerski (jezerski@xxxxxxxxxxxx)
Date: Fri Nov 30 2001 - 16:28:23 GMT-3
I did a similar practice exercise that also had EIGRP hanging off of the
OSPF cloud. I was able to redistribte connected into EIGRP on the ASBR
running OSPF and EIGRP. Then when redistributing OSPF into EIGRP, you can
use the ospf summary address command. I know this sounds convoluted and
wierd, but it worked for me.
-Joe
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Vincent Zhang
Sent: Friday, November 30, 2001 10:09 AM
To: ccielab@groupstudy.com
Subject: AGAIN! IGRP OSPF redis
Hi All,
Pls consider the following simple topology for redis OSPF into IGRP.
s0 s1
R2----------------------R1---------------------
172.16.1.0/24 172.16.2.0/28
R2 runs IGRP only
R1 runs IGRP on S0 and OSPF on S1, and there is a big OSPF cloud attached
from
S1.
you are trying to redis ospf into igrp, in this case, I am talking how to
redis the 172.16.2.0/28 into R1.
I know in ios 12.1, the normal "redis connect" and "summary" way doesn't
work, but I also hear about that the "second address" works, any one could
show me a light about where to put the secondary address.
Thanks, V
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:27 GMT-3