From: Mike Schlenger (mschlenger@xxxxxxxxxxxxxxxx)
Date: Fri Nov 30 2001 - 16:09:00 GMT-3
You have to summarize your routes into a mask IGRP will understand. Summary
address will not work as it summarizes into OSPF areas. Try "area x range
x.x.x.0 x.x.x.255". Then redistribute into IGRP. I would watch out for the
secondary address. Proctors might not like that solution.
Mike
Mike Schlenger
CCIE #7079
N2N Solutions
mschlenger@n2nsolutions.com
847.592.3912
-----Original Message-----
From: Vincent Zhang [mailto:vincentzhang@yahoo.com]
Sent: Friday, November 30, 2001 12:09 PM
To: ccielab@groupstudy.com
Subject: AGAIN! IGRP OSPF redis
Hi All,
Pls consider the following simple topology for redis OSPF into IGRP.
s0 s1
R2----------------------R1---------------------
172.16.1.0/24 172.16.2.0/28
R2 runs IGRP only
R1 runs IGRP on S0 and OSPF on S1, and there is a big OSPF cloud attached
from
S1.
you are trying to redis ospf into igrp, in this case, I am talking how to
redis the 172.16.2.0/28 into R1.
I know in ios 12.1, the normal "redis connect" and "summary" way doesn't
work, but I also hear about that the "second address" works, any one could
show me a light about where to put the secondary address.
Thanks, V
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:27 GMT-3