From: paul jin (pauljin@xxxxxxxxx)
Date: Thu Nov 29 2001 - 20:57:03 GMT-3
Hi Dan,
Brian is correct. You can run ospf and bgp on the AS2509 router. It might be t
he IOS that you have that does not
let it run. I have a AS2509.
r9-2509#conf t
Enter configuration commands, one per line. End with CNTL/Z.
r9-2509(config)#router ?
bgp Border Gateway Protocol (BGP)
egp Exterior Gateway Protocol (EGP)
eigrp Enhanced Interior Gateway Routing Protocol (EIGRP)
igrp Interior Gateway Routing Protocol (IGRP)
isis ISO IS-IS
iso-igrp IGRP for OSI networks
mobile Mobile routes
odr On Demand stub Routes
ospf Open Shortest Path First (OSPF)
rip Routing Information Protocol (RIP)
static Static routes
traffic-engineering Traffic engineered routes
r9-2509(config)#router ospf 100
r9-2509(config-router)#net 10.0.0.0 0.0.0.255 area 0
r9-2509(config-router)#^Z
r9-2509#conf t
Enter configuration commands, one per line. End with CNTL/Z.
r9-2509(config)#router bgp 100
r9-2509(config-router)#^Z
r9-2509#
r9-2509#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-D-L), Version 12.0(9), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Mon 24-Jan-00 22:06 by bettyl
Image text-base: 0x030387D0, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c)XB1, PLATFORM SPECIFIC RELEASE SOFTWARE
(fc1)
BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c)XB1, PLATFORM
SPECIFIC RELEASE SOFTWARE (fc1)
r9-2509 uptime is 1 day, 18 hours, 55 minutes
System restarted by power-on
System image file is "flash:/c2500-d-l.120-9.bin"
cisco AS2509-RJ (68030) processor (revision I) with 2048K/2048K bytes of memory
.
Processor board ID 08009557, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
8 terminal line(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2102
DAN DORTON <DHSTS68@dhs.state.il.us> wrote: This is an 2509 remote access ser
ver.
When I try to configure OSPF, or BGP on the router it says unknown routing prot
ocol.
Although I can configure RIP, IGRP, or EIGRP.
Memory has nothing to do with it.
When I do a router ? under the config it shows OSPF & BGP, but it will not allo
w you to configure them.
I repeat TAC says these two protocols are unsupported on this unit.
Thanks,
>>> "Brian Dennis"
11/29/01 12:12PM >>>
Dan,
A 2509 will support BGP and OSPF. I think TAC must not have understand what
you were asking.
Brian Dennis, CCIE #2210 (R&S)(ISP/Dial) CCSI #98640
5G Networks, Inc.
bdennis@5g.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
DAN DORTON
Sent: Thursday, November 29, 2001 9:41 AM
To: DAN DORTON; ccielab@groupstudy.com
Subject: Re: 2509AS
Nevermind. TAC answered my question.
Apparently the BGP & OSPF processes are too CPU intensive for that unit &
are unsupported.
Thanks anyways,
>>> "DAN DORTON" 11/29/01 11:13AM >>>
I am having trouble finding an IOS that supports OSPF & BGP routing on my
2509AS.
It only has 8MB flash & 4MB ram.
Am I missing something here? It will use RIP & EIGRP.
Thanks in advance.
Paul Jin, CCNP, CCDA, MCSE+I
Network Engineer
PaulJin@Yahoo.com
---------------------------------
Do You Yahoo!?
Yahoo! GeoCities - quick and easy web site hosting, just $8.95/month.
Paul Jin, CCNP, CCDA, MCSE+I
Network Engineer
PaulJin@Yahoo.com
---------------------------------
Do You Yahoo!?
Yahoo! GeoCities - quick and easy web site hosting, just $8.95/month.
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:26 GMT-3