From: Rthugo1@xxxxxxx
Date: Thu Nov 29 2001 - 13:29:07 GMT-3
Hey all,
I know this might be a simple question, but I looked on the CCO and archives
and I'm baffled! I have 3 2501's and a 2514 on my home lab that I've tried
to configure with BGP in order to do some policy routing. I want to use
these to create extra AS's. I go to enable BGP, create the neighbor
relationship and everything is good. A "sh ip bgp neigh" shows "Established"
on all connections. The problem happens when I try to enable a network under
the BGP. This, almost instantaneously, causes thesoftware to crash!! What
gives?!?!
*A little info:
1. I already have routes in the routing table for all the networks that I'm
trying to enable.
2. I have beefed up the memory in all of these 2500's to the 16MB max,
however, they are using the 2MB shared memory.....could this be the issue??
3. sh version
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-D-L) , Version 12.0 ( 6 ) , RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Tue 10-Aug-99 23:52 by phanguye
Image text-base: 0x030382E0, data-base: 0x00001000
ROM: System Bootstrap, Version 5.2 (8a) , RELEASE SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-RXBOOT) , Version 10.2 (8a) , RELEASE
SOFTWARE (fc1)
R1 uptime is 12 hours, 1 minute
System restarted by reload
System image file is "flash:aaa0862.bin"
cisco 2500 (68030) processor (revision F) with 16384K/2048K bytes of memory.
Processor board ID 05199173 , with hardware revision 00000000
Bridging software.
X.25 software, Version 3 . 0 . 0 .
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2102
4. I have tried this on several occasions, but with a repeated result
Help me out, guys and gals, please!
Rob H. NP, DP, blah,blah,blah..............
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:25 GMT-3