From: Lupi, Guy (Guy.Lupi@xxxxxxxxxxxxx)
Date: Wed Nov 28 2001 - 18:22:46 GMT-3
It doesn't on my routers either, maybe the assumption was that since the
dead interval is 4 times the hello that changing the dead interval would
automatically change the hello also, although that doesn't seem to be the
case. Changing the network type to non broadcast or point to multipoint
changes the hello interval to 30 though, of course you would have to change
it on both sides.
-----Original Message-----
From: Dane Clemons
To: ccielab@groupstudy.com
Sent: 11/28/2001 3:58 PM
Subject: CCBOOTCAMP LAB 20
Requirement of the lab states to change the hello interval on a OSPF
interface
without using the IP OSPF hello interval command. The IP OSPF dead
interval
command is used, will this command change the hello interval. I have
tried this
command and it does not work. Maybe a code issue? Any advice would be
appreciated.
Thanks
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:24 GMT-3