From: Brian Hescock (bhescock@xxxxxxxxx)
Date: Tue Nov 27 2001 - 18:12:21 GMT-3
Actually, given his configuration, the ospf router id will not change by "clear
ip ospf process", give it a
try. There is a way to make it change by using "clear ip ospf process" but the
re's something missing from the
config... :o)
Brian
jmaiman@ebnetworks.com wrote:
> Hi Michael,
>
> The "clear ip ospf process <ProcNum>" will do what you're looking
> for. However, be careful, it will completely restart the OSPF process on
> your router (i.e. drop all adjacencies and force network reconvergence).
> Hope this helps.
>
> --Jon
> P.S. Please refer to this url:
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/np1_r/
1rprt1/1rospf.htm#xtocid272947
>
> for more info.
>
> "Michael Jia" <mjia@cisco.com>@groupstudy.com on 11/27/2001 01:03:56 PM
>
> Please respond to "Michael Jia" <mjia@cisco.com>
>
> Sent by: nobody@groupstudy.com
>
> To: <ccielab@groupstudy.com>
> cc:
>
> Subject: command change OSPF routerID ?
>
> Hi,
>
> Is there a command to force the router to reset OSPF router ID without
> rebooting the router?
>
> The scenerio is :
> 1. define the ospf process
> router ospf 10
> ! e0's address
> network 192.168.0.1 0.255.255.255 area 0
>
> 2. define a loopback
> ! the ospf router ID suppose-to-be
> interface loopback 0
> ip address 100.100.100.100 255.255.255.0
> 3. add loopback into ospf
> router ospf 10
> network 100.0.0.0 0.255.255.255 area 0
>
> Now the router using e0's ip as OSPF router ID. How to
> make it change the ID to lo0's ip?
>
> I know reboot the router will do it. But is there an IOS
> command to do the same job?
>
> Thanks a lot.
> --
> Michael Jia
> Software Eng, INS - Security & VPN Mgmt Serv
> Cisco Systems, Inc.
> Work: (408) 527-4632
> Fax: (408) 527-7570
> EMail: mjia@cisco.com
>
> Cisco - Empower the Internet Generation.
>
> [GroupStudy.com removed an attachment of type text/x-vcard which had a name
> of Michael Jia.vcf]
> **********************************************************************
> The information contained in this electronic mail transmission is intended
> by INRANGE Technologies for the use of the named individual or entity to
> which it is directed and may contain information that is confidential or
> privileged. If you have received this electronic mail transmission in
> error, please delete it from your system without copying or forwarding it,
> and notify the sender of the error by reply email or call the INRANGE
> Help Desk at 215-293-2811 so that the sender's address records can be
> corrected.
>
> **********************************************************************
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:23 GMT-3