From: tom cheung (tkc9789@xxxxxxxxxxx)
Date: Tue Nov 27 2001 - 10:33:44 GMT-3
Vincent,
For security on IP level, I believe the only thing you can do is to restrict
which IP addresses can telnet into the switch using the "set ip permit "
and "set ip permit enable" commands.
Tom
>From: "Vincent Zhang" <vincentzhang@yahoo.com>
>Reply-To: "Vincent Zhang" <vincentzhang@yahoo.com>
>To: <ccielab@groupstudy.com>
>Subject: MAC and IP security in Catalyst
>Date: Tue, 27 Nov 2001 11:55:53 +0800
>
>Hi All,
>
>We all know that, if port security is setup for a port in catalyst, only
>the
>permitted mac addr host could be attached to the port. is there any
>solution
>to setup port security on IP level, only configured IP addr is permitted be
>attached.
>
>Thanks, V
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:23 GMT-3