From: Henry (henryd31@xxxxxxxx)
Date: Mon Nov 26 2001 - 22:36:05 GMT-3
If you look at section 2, task 3, bullet #5, they give you the
requirement
For the statement. The statement itself doesn't do much in this scenario
as
There are no other eigrp routes to be sent out to r1. It only signifies
the
Requirement, the purpose simply is to make sure you understand some
redistribution mechanisms.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Dennis #6
Sent: Monday, November 26, 2001 7:33 PM
To: ccielab@groupstudy.com
Subject: Boot Camp Lab 15 distribute list
In the following solution for R5 in lab 15, a distribute list is placed
under eigrp denying any. I read some reference material and I'm still
confused about this config. Doesn't this config stop all routes from
being
redistributed into ospf? If so what is the purpose of this? Obviously
I'm
not getting something. Good luck in your studies!
Cheers,
Dennis
router eigrp 10
passive-interface Serial1.1
network 150.100.0.0
distribute-list 1 out
!
router ospf 10
redistribute eigrp 10 metric 1 subnets
passive-interface Ethernet0
network 150.100.2.0 0.0.1.255 area 0
network 150.100.10.0 0.0.0.255 area 0
area 0 authentication message-digest
!
access-list 1 deny any
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:23 GMT-3