From: Erick B. (erickbe@xxxxxxxxx)
Date: Sun Nov 25 2001 - 04:47:31 GMT-3
Hi,
If you use MHSRP (multiple groups) you can configure 2
standby groups on a interface/subnet and assign half
the users default-gateway to one group and the other
half to the other group. Just set the priorities so
group 1 is active on R1 and group 2 is active on R2.
When one of the routers fails then the other router
will be active for both groups. You can expand this
for however many standby groups you need per subnet.
Is this what you meant by load sharing or were you
looking for something else?
Erick
--- "Adekola, Dennis D"
<Dennis.D.Adekola@BritishAirways.com> wrote:
> Hi Guys,
>
> Just wondered,
> Is it possible to do load balancing/load sharing
> with HSRP
>
> Cheers
>
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:22 GMT-3