From: Jonathan Chin Kah Fi (kachin@xxxxxxxxx)
Date: Fri Nov 23 2001 - 13:10:23 GMT-3
I have a question here on bridging for the gurus out there...
Suppose I have a router on a stick scenario whereby it is connected to a cat5k'
s trunk carrying
vlan 2,3 and 4. So, I will have to create three sub-interfaces on the router's
fast ethernet interface
to receive each of the ISL colors. How would you configure IRB if suppose you w
ant to bridge
between vlan 3 and 4 and then route between vlan 2 and the bridged vlans???
Any suggestions? One BVI or two?
DAN DORTON wrote:
> Do any of you bridging guru's ou there have a list of the finer points of br
idging that they used for CCIE lab study?
>
> I am not looking for answers, just topics & issues to focus on.
>
> I just started working on bridging & I have built several scenarios so far of
the basic configurations & such. ( SRB, RSRB, SRTLB, CRB, IRB.)
>
> I know there are filtering techniques & timers too adjust also.
>
> I am getting closer to running out of time everyday & thought I would try to
save a little here.
>
> Thanks in advance ,
>
> Dan
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:21 GMT-3